Wiring the ACT ZRW230 Options

[Damian Mehers]

Hi there,

I've bought a few ZRW230 (wall mounted 3-way switch), and am having trouble working out how to wire it up.

Out of the wall I have a wire that is always live, and then two "output" wires -- when the old switch was "on" then the power would flow to one output wire, and when it was "off" power would flow to the other output wire (because it is a three way switch -- there is a second switch that controls the same light).

I've had an electician install a "neutral" wire, since this is also required.

The documentation describes the following connections on the ZRW230:

* L: Line Voltage Input
* N: Line Neutral
* N: Load Neutral (Line Neutral)
* 1: Switched Load Output
* 2: Auxiliary Switch reference (Line Neutral)
* 3: Auxiliary Switch Signal Input

Has anyone wired one of these up before? The installation instructions are at http://www.act-solutions.com/HomePro/pdfs/...RW230_instr.pdf

Thanks,

/Damian